Gears - Spur - Standard - 64DP - Stainless

Gears -> Spur -> Standard -> 64DP -> Stainless

There are 3 products in the sub-categories of Gears - Spur - Standard - 64DP - Stainless. Browse the Gears - Spur - Standard - 64DP - Stainless products table.

Category Details

A selection of Stainless 64DP Standard Spur Gears. PCD in mm = No. of Teeth x 0.3969 (1/64 in.). 20 Degree Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

  • The diameter increases by 1 inch for every 64 teeth
  • 64 Diametrical Pitch. Approx 1.25mm between the teeth.

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Gears - Spur - Standard - 64DP - Stainless category on the Small Parts & Bearings online store.
Number of Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Face Width (FW) Type Indicative
Image
Spur Gears - 48 tooth - 19.05x6.35 mm Hubbed - Stainless Steel 303/304 Similar to A2, 18-8 HRB80 Gear
Number of Teeth
48
Pitch Circle Diameter (PD)
19.050
mm
Bore (d)
6.350
mm
Outside Diameter (OD)
19.81
mm
Face Width (FW)
4.78
mm
Type
Hubbed
Spur Gears - 48 tooth - 19.05x6.35 mm Hubbed - Stainless Steel 303/304 Similar to A2, 18-8 HRB80 Gear
Material: Stainless Steel 303/304 (Similar to A2 or 18-8) HRB80    Locking Method: Pin Hub - No Set Screw    Quality: AGMA Q10   
Part Number: G019B-048-D64-032-064-S3 (Each)
2 Available Now | Further orders can be expected around Sat, Jul 25, 2026
$39.68 AUD
$47.62 AUD $39.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 2 available can be backordered.
Number of Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Indicative
Image
Spur Gears - 48 tooth - 19.05x6.35 mm Hubbed - Stainless Steel 303/304 Similar to A2, 18-8 HRB80 Gear
Number of Teeth
48
Pitch Circle Diameter (PD)
19.050
mm
Bore (d)
6.350
mm
Outside Diameter (OD)
19.81
mm
Spur Gears - 48 tooth - 19.05x6.35 mm Hubbed - Stainless Steel 303/304 Similar to A2, 18-8 HRB80 Gear
Material: Stainless Steel 303/304 (Similar to A2 or 18-8) HRB80    Face Width (FW): 4.78 mm    Type: Hubbed    Locking Method: Pin Hub - No Set Screw    Quality: AGMA Q10   
Part Number: G019B-048-D64-032-064-S3 (Each)
2 Available Now | Further orders can be expected around Sat, Jul 25, 2026
$39.68 AUD
$47.62 AUD $39.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

2 Available Now. Backorder if more than 2.
Spur Gears - 64 tooth - 25.4x6.35 mm Hubbed - Stainless Steel 303/304 Similar to A2, 18-8 HRB80 Gear
Number of Teeth
64
Pitch Circle Diameter (PD)
25.400
mm
Bore (d)
6.350
mm
Outside Diameter (OD)
26.19
mm
Face Width (FW)
4.78
mm
Type
Hubbed
Spur Gears - 64 tooth - 25.4x6.35 mm Hubbed - Stainless Steel 303/304 Similar to A2, 18-8 HRB80 Gear
Material: Stainless Steel 303/304 (Similar to A2 or 18-8) HRB80    Locking Method: Pin Hub - No Set Screw    Quality: AGMA Q10   
Part Number: G025B-064-D64-032-064-S3 (Each)
2 Available Now | Further orders can be expected around Sat, Jul 25, 2026
$64.14 AUD
$76.96 AUD $64.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 2 available can be backordered.
Spur Gears - 64 tooth - 25.4x6.35 mm Hubbed - Stainless Steel 303/304 Similar to A2, 18-8 HRB80 Gear
Number of Teeth
64
Pitch Circle Diameter (PD)
25.400
mm
Bore (d)
6.350
mm
Outside Diameter (OD)
26.19
mm
Spur Gears - 64 tooth - 25.4x6.35 mm Hubbed - Stainless Steel 303/304 Similar to A2, 18-8 HRB80 Gear
Material: Stainless Steel 303/304 (Similar to A2 or 18-8) HRB80    Face Width (FW): 4.78 mm    Type: Hubbed    Locking Method: Pin Hub - No Set Screw    Quality: AGMA Q10   
Part Number: G025B-064-D64-032-064-S3 (Each)
2 Available Now | Further orders can be expected around Sat, Jul 25, 2026
$64.14 AUD
$76.96 AUD $64.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

2 Available Now. Backorder if more than 2.
Spur Gears - 72 tooth - 28.575x6.35 mm Hubbed - Stainless Steel 303/304 Similar to A2, 18-8 HRB80 Gear
Number of Teeth
72
Pitch Circle Diameter (PD)
28.575
mm
Bore (d)
6.350
mm
Outside Diameter (OD)
29.36
mm
Face Width (FW)
4.78
mm
Type
Hubbed
Spur Gears - 72 tooth - 28.575x6.35 mm Hubbed - Stainless Steel 303/304 Similar to A2, 18-8 HRB80 Gear
Material: Stainless Steel 303/304 (Similar to A2 or 18-8) HRB80    Locking Method: Pin Hub - No Set Screw    Quality: AGMA Q10   
Part Number: G029B-072-D64-032-064-S3 (Each)
2 Available Now | Further orders can be expected around Sat, Jul 25, 2026
$80.77 AUD
$96.93 AUD $80.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 2 available can be backordered.
Spur Gears - 72 tooth - 28.575x6.35 mm Hubbed - Stainless Steel 303/304 Similar to A2, 18-8 HRB80 Gear
Number of Teeth
72
Pitch Circle Diameter (PD)
28.575
mm
Bore (d)
6.350
mm
Outside Diameter (OD)
29.36
mm
Spur Gears - 72 tooth - 28.575x6.35 mm Hubbed - Stainless Steel 303/304 Similar to A2, 18-8 HRB80 Gear
Material: Stainless Steel 303/304 (Similar to A2 or 18-8) HRB80    Face Width (FW): 4.78 mm    Type: Hubbed    Locking Method: Pin Hub - No Set Screw    Quality: AGMA Q10   
Part Number: G029B-072-D64-032-064-S3 (Each)
2 Available Now | Further orders can be expected around Sat, Jul 25, 2026
$80.77 AUD
$96.93 AUD $80.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

2 Available Now. Backorder if more than 2.