Couplings - Helical - Long Series - Clamp Type

Couplings -> Helical -> Long Series -> Clamp Type

There is only 1 product in the sub-categories of Couplings - Helical - Long Series - Clamp Type. Browse the Couplings - Helical - Long Series - Clamp Type products table.

Category Details

A selection of Clamp Type Long Series Helical Couplings. Zero backlash, one piece construction

  • An expanded range may be available on special order. Please enquire.
  • Maximises torsional stiffness without inducing high bearing loads
  • Over 50,000,000 test cycles at rated load and 80 percent offset without failure
  • Maintenance Free. Recommended temperature range minus 80 oC to plus 80 Deg C

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Couplings - Helical - Long Series - Clamp Type category on the Small Parts & Bearings online store.
Bore (B1) Bore (B2) OD (D) / Clearance Dia (H) Length (L) Working Torque Maximum Speed Indicative
Image
Bore (B1)
5.000
mm
+ 0.020 / - 0.000
(Equiv. 0.197 in.)
Bore (B2)
6.350
mm
+ 0.020 / - 0.000
(Equiv. 0.25 in.)
OD (D) / Clearance Dia (H)
16 / 18
mm
+/- 0.13
(Equiv. 0.63 in.)
Length (L)
23.5
mm
+/- 0.13
Working Torque
0.85
N.m
Maximum Speed
10000
RPM
Helical Couplings - 5x6.35 - 16 / 18 - Aluminium 7075-T6
Material: Aluminium 7075-T6    Hub Length (E): 5.90 mm    Torsional Stiffness: 81.0 Nm/rad    Parallel Misalignment: 0.20 mm    Angular Misalignment: 2.5 Deg    Axial Misalignment: +/-0.40 mm    Max Inertia: 3.20 g/cm Sq   
Part Number: CP-050-064-16-024-H-RFC-AL
Helical Couplings - 5x6.35 - 16 / 18 Long Series - Aluminium 7075-T6 Coupling
1 Available Now | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$80.00 AUD
$152.00 AUD $80.00 AUD
Excludes GST and overseas Taxes & Duties
Each
Quantity Required

1 Available Now. These are priced to quit. Please contact us for a quote if you require more.
Bore (B1) Bore (B2) OD (D) / Clearance Dia (H) Length (L) Indicative
Image
Bore (B1)
5.000
mm
+ 0.020 / - 0.000
(Equiv. 0.197 in.)
Bore (B2)
6.350
mm
+ 0.020 / - 0.000
(Equiv. 0.25 in.)
OD (D) / Clearance Dia (H)
16 / 18
mm
+/- 0.13
(Equiv. 0.63 in.)
Length (L)
23.5
mm
+/- 0.13
Helical Couplings - 5x6.35 - 16 / 18 - Aluminium 7075-T6
Material: Aluminium 7075-T6    Working Torque: 0.85 N.m    Maximum Speed: 10000 RPM    Hub Length (E): 5.90 mm    Torsional Stiffness: 81.0 Nm/rad    Parallel Misalignment: 0.20 mm    Angular Misalignment: 2.5 Deg    Axial Misalignment: +/-0.40 mm    Max Inertia: 3.20 g/cm Sq   
Part Number: CP-050-064-16-024-H-RFC-AL
Helical Couplings - 5x6.35 - 16 / 18 Long Series - Aluminium 7075-T6 Coupling
1 Available Now | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$80.00 AUD
$152.00 AUD $80.00 AUD
Excludes GST and overseas Taxes & Duties
Each
Quantity Required

1 Available Now. These are priced to quit. Please contact us for a quote if you require more.