Washers - Flat - Commercial - High Tensile

Washers -> Flat -> Commercial -> High Tensile

There are 5 products in the sub-categories of Washers - Flat - Commercial - High Tensile. Browse the Washers - Flat - Commercial - High Tensile products table.

Category Details

A selection of High Tensile Commercial Flat Washers. Grade 8 high tensile washers.

  • Flat washers are available in many different materials, and can be used for spacing and shimming nuts and bolts, bearing shaft and all types of mechanical applications. An expanded range may be available on special order. Please enquire.
  • Flat plain washers distrubute the load of screws and other fasteners, which prevents the fastener from indenting the material being fastened. Commercial washers have wide tolerances, whilst precision washers have precise tolerances.
  • Washers also increase the surface area, reducing the risk of loosening. Note that the Nominal ID is the shaft, bolt or screw size that the washer is designed to fit over. The washer ID will have clearance on that size. See tolerances and standards listed.
  • ASTM F436 1985.
  • Please note! Tolerances for commercial grade washers are much larger than for precision washers.

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Washers - Flat - Commercial - High Tensile category on the Small Parts & Bearings online store.
Nominal Inside Diameter (d) Nominal Outside Diameter (D) Thickness (T) Other Indicative
Image
Nominal Inside Diameter (d)
6.35
mm
ASME / ANSI B18.22.1
(Equiv. 0.25 in.)
Nominal Outside Diameter (D)
15.90
mm
ASME / ANSI B18.22.1
(Equiv. 0.626 in.)
Thickness (T)
2.00
mm
ASME / ANSI B18.22.1
(Equiv. 0.079 in.)
Other
1/4 High Tensile Washer
Flat Washers - 6.35x15.9x2 mm - Steel - Zinc Plated
Material: Steel - Zinc Plated    Grade: Commercial    Actual ID (Ref): 6.7 mm   
Part Number: W0064-F-016-020-HTZ (70 Pcs)
Flat Washers - 6.35x15.9x2 mm Commercial - Steel - Zinc Plated Washer
1 pack (70 pcs) Available Now | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$14.00 AUD
$26.60 AUD $14.00 AUD
Per 70
Quantity Required

1 pack (70 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Nominal Inside Diameter (d) Nominal Outside Diameter (D) Thickness (T) Other Indicative
Image
Nominal Inside Diameter (d)
6.35
mm
ASME / ANSI B18.22.1
(Equiv. 0.25 in.)
Nominal Outside Diameter (D)
15.90
mm
ASME / ANSI B18.22.1
(Equiv. 0.626 in.)
Thickness (T)
2.00
mm
ASME / ANSI B18.22.1
(Equiv. 0.079 in.)
Other
1/4 High Tensile Washer
Flat Washers - 6.35x15.9x2 mm - Steel - Zinc Plated
Material: Steel - Zinc Plated    Grade: Commercial    Actual ID (Ref): 6.7 mm   
Part Number: W0064-F-016-020-HTZ (70 Pcs)
Flat Washers - 6.35x15.9x2 mm Commercial - Steel - Zinc Plated Washer
1 pack (70 pcs) Available Now | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$14.00 AUD
$26.60 AUD $14.00 AUD
Per 70
Quantity Required

1 pack (70 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Nominal Inside Diameter (d)
7.94
mm
ASTM F436 1985
(Equiv. 0.313 in.)
Nominal Outside Diameter (D)
17.00
mm
ASTM F436 1985
(Equiv. 0.669 in.)
Thickness (T)
2.00
mm
ASTM F436 1985
(Equiv. 0.079 in.)
Other
5/16 (M8) High Tensile Washer
Flat Washers - 7.94x17x2 mm - Steel - Zinc Plated
Material: Steel - Zinc Plated    Grade: Commercial    Actual ID (Ref): 8.8 mm   
Part Number: W0079-F-017-020-HTZ (100 Pcs)
Flat Washers - 7.94x17x2 mm Commercial - Steel - Zinc Plated Washer
19 units (1900 pcs) Available Now | Item Discontinued - Up to 19 may be ordered online. No backorders. Please contact us if you need a larger quantity
$10.00 AUD
$19.00 AUD $10.00 AUD
Per 100
Quantity Required

19 units (1900 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Nominal Inside Diameter (d)
7.94
mm
ASTM F436 1985
(Equiv. 0.313 in.)
Nominal Outside Diameter (D)
17.00
mm
ASTM F436 1985
(Equiv. 0.669 in.)
Thickness (T)
2.00
mm
ASTM F436 1985
(Equiv. 0.079 in.)
Other
5/16 (M8) High Tensile Washer
Flat Washers - 7.94x17x2 mm - Steel - Zinc Plated
Material: Steel - Zinc Plated    Grade: Commercial    Actual ID (Ref): 8.8 mm   
Part Number: W0079-F-017-020-HTZ (100 Pcs)
Flat Washers - 7.94x17x2 mm Commercial - Steel - Zinc Plated Washer
19 units (1900 pcs) Available Now | Item Discontinued - Up to 19 may be ordered online. No backorders. Please contact us if you need a larger quantity
$10.00 AUD
$19.00 AUD $10.00 AUD
Per 100
Quantity Required

19 units (1900 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Nominal Inside Diameter (d)
9.53
mm
ASTM F436 1985
(Equiv. 0.375 in.)
Nominal Outside Diameter (D)
20.60
mm
ASTM F436 1985
(Equiv. 0.811 in.)
Thickness (T)
2.00
mm
ASTM F436 1985
(Equiv. 0.079 in.)
Other
3/8 High Tensile Washer
Flat Washers - 9.53x20.6x2 mm - Steel - Zinc Plated
Material: Steel - Zinc Plated    Grade: Commercial    Actual ID (Ref): 10.5 mm   
Part Number: W0095-F-021-020-HTZ (35 Pcs)
Flat Washers - 9.53x20.6x2 mm Commercial - Steel - Zinc Plated Washer
1 pack (35 pcs) Available Now | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$20.00 AUD
$38.00 AUD $20.00 AUD
Per 35
Quantity Required

1 pack (35 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Nominal Inside Diameter (d)
9.53
mm
ASTM F436 1985
(Equiv. 0.375 in.)
Nominal Outside Diameter (D)
20.60
mm
ASTM F436 1985
(Equiv. 0.811 in.)
Thickness (T)
2.00
mm
ASTM F436 1985
(Equiv. 0.079 in.)
Other
3/8 High Tensile Washer
Flat Washers - 9.53x20.6x2 mm - Steel - Zinc Plated
Material: Steel - Zinc Plated    Grade: Commercial    Actual ID (Ref): 10.5 mm   
Part Number: W0095-F-021-020-HTZ (35 Pcs)
Flat Washers - 9.53x20.6x2 mm Commercial - Steel - Zinc Plated Washer
1 pack (35 pcs) Available Now | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$20.00 AUD
$38.00 AUD $20.00 AUD
Per 35
Quantity Required

1 pack (35 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Nominal Inside Diameter (d)
15.88
mm
ASTM F436 1985
(Equiv. 0.625 in.)
Nominal Outside Diameter (D)
33.00
mm
ASTM F436 1985
(Equiv. 1.299 in.)
Thickness (T)
3.00
mm
ASTM F436 1985
(Equiv. 0.118 in.)
Other
5/8 (M16) High Tensile
Flat Washers - 15.88x33x3 mm - Steel - Zinc Plated
Material: Steel - Zinc Plated    Grade: Commercial    Actual ID (Ref): 17.2 mm   
Part Number: W0159-F-033-030-HTZ (20 Pcs)
Flat Washers - 15.88x33x3 mm Commercial - Steel - Zinc Plated Washer
7 units (140 pcs) Available Now | Item Discontinued - Up to 7 may be ordered online. No backorders. Please contact us if you need a larger quantity
$30.00 AUD
$57.00 AUD $30.00 AUD
Per 20
Quantity Required

7 units (140 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Nominal Inside Diameter (d)
15.88
mm
ASTM F436 1985
(Equiv. 0.625 in.)
Nominal Outside Diameter (D)
33.00
mm
ASTM F436 1985
(Equiv. 1.299 in.)
Thickness (T)
3.00
mm
ASTM F436 1985
(Equiv. 0.118 in.)
Other
5/8 (M16) High Tensile
Flat Washers - 15.88x33x3 mm - Steel - Zinc Plated
Material: Steel - Zinc Plated    Grade: Commercial    Actual ID (Ref): 17.2 mm   
Part Number: W0159-F-033-030-HTZ (20 Pcs)
Flat Washers - 15.88x33x3 mm Commercial - Steel - Zinc Plated Washer
7 units (140 pcs) Available Now | Item Discontinued - Up to 7 may be ordered online. No backorders. Please contact us if you need a larger quantity
$30.00 AUD
$57.00 AUD $30.00 AUD
Per 20
Quantity Required

7 units (140 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Nominal Inside Diameter (d)
25.40
mm
ASTM F436 1985
(Equiv. 1 in.)
Nominal Outside Diameter (D)
51.00
mm
ASTM F436 1985
(Equiv. 2.008 in.)
Thickness (T)
3.50
mm
ASTM F436 1985
(Equiv. 0.138 in.)
Other
1 Inch High Tensile
Flat Washers - 25.4x51x3.5 mm - Steel - Zinc Plated
Material: Steel - Zinc Plated    Grade: Commercial    Actual ID (Ref): 26 mm   
Part Number: W0254-F-051-035-HTZ (10 Pcs)
Flat Washers - 25.4x51x3.5 mm Commercial - Steel - Zinc Plated Washer
8 units (80 pcs) Available Now | Item Discontinued - Up to 8 may be ordered online. No backorders. Please contact us if you need a larger quantity
$20.00 AUD
$38.00 AUD $20.00 AUD
Per 10
Quantity Required

8 units (80 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Nominal Inside Diameter (d)
25.40
mm
ASTM F436 1985
(Equiv. 1 in.)
Nominal Outside Diameter (D)
51.00
mm
ASTM F436 1985
(Equiv. 2.008 in.)
Thickness (T)
3.50
mm
ASTM F436 1985
(Equiv. 0.138 in.)
Other
1 Inch High Tensile
Flat Washers - 25.4x51x3.5 mm - Steel - Zinc Plated
Material: Steel - Zinc Plated    Grade: Commercial    Actual ID (Ref): 26 mm   
Part Number: W0254-F-051-035-HTZ (10 Pcs)
Flat Washers - 25.4x51x3.5 mm Commercial - Steel - Zinc Plated Washer
8 units (80 pcs) Available Now | Item Discontinued - Up to 8 may be ordered online. No backorders. Please contact us if you need a larger quantity
$20.00 AUD
$38.00 AUD $20.00 AUD
Per 10
Quantity Required

8 units (80 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.