Shafting - Pre Drilled and Tapped - Stainless Steel

8 Products in this selection
  • For use with rail supports and open linear bearings
Additional resources:
Drill Rod
A more concise listing may be found on the Smallparts store at Shafting - Pre Drilled and Tapped - Stainless Steel. Smallparts promote the most popular MBA products.
Diameter (D) Length (L) Material Thread Size Hole Pitch (P) Surface Finish Indicative
Image
Diameter (D)
12.700
mm
- 0.010 / - 0.030
(0.5 in.)
Length (L)
609.6
mm

(24 in.)
Material
440C Case Hardened Stainless
Hole Pitch (P)
101.6
Surface Finish
0.30 um
Microns
Pre Drilled and Tapped Shafting - 12.7x609.6 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C    Ends: Finished and Chamfered   
Part Number: 0R-0127-0610-DT-S440-T30 Pre Drilled and Tapped Shafting - 12.7x609.6 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Mon, Jun 30, 2025
$348.32 AUD
$417.98 AUD $348.32 AUD
Each
Diameter (D) Length (L) Material Thread Size Indicative
Image
Diameter (D)
12.700
mm
- 0.010 / - 0.030
(0.5 in.)
Length (L)
609.6
mm

(24 in.)
Material
440C Case Hardened Stainless
Pre Drilled and Tapped Shafting - 12.7x609.6 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 101.6    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C    Ends: Finished and Chamfered   
Part Number: 0R-0127-0610-DT-S440-T30 Pre Drilled and Tapped Shafting - 12.7x609.6 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Mon, Jun 30, 2025
$348.32 AUD
$417.98 AUD $348.32 AUD
Each
View the product page first if you are unsure.
Diameter (D)
15.875
mm
- 0.010 / - 0.030
(0.625 in.)
Length (L)
101.6
mm

(4 in.)
Material
440C Case Hardened Stainless
Hole Pitch (P)
101.6
Surface Finish
0.30 um
Microns
Pre Drilled and Tapped Shafting - 15.875x101.6 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C    Ends: Finished and Chamfered   
Part Number: 0R-0159-1829-DT-S440-T30 Pre Drilled and Tapped Shafting - 15.875x101.6 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Mon, Jun 30, 2025
$1,946.23 AUD
$2,335.47 AUD $1,946.23 AUD
Each
Diameter (D)
15.875
mm
- 0.010 / - 0.030
(0.625 in.)
Length (L)
101.6
mm

(4 in.)
Material
440C Case Hardened Stainless
Pre Drilled and Tapped Shafting - 15.875x101.6 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 101.6    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C    Ends: Finished and Chamfered   
Part Number: 0R-0159-1829-DT-S440-T30 Pre Drilled and Tapped Shafting - 15.875x101.6 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Mon, Jun 30, 2025
$1,946.23 AUD
$2,335.47 AUD $1,946.23 AUD
Each
View the product page first if you are unsure.
Diameter (D)
15.875
mm
- 0.010 / - 0.030
(0.625 in.)
Length (L)
609.6
mm

(24 in.)
Material
440C Case Hardened Stainless
Hole Pitch (P)
101.6
Surface Finish
0.30 um
Microns
Pre Drilled and Tapped Shafting - 15.875x609.6 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C    Ends: Finished and Chamfered   
Part Number: 0R-0159-0610-DT-S440-T30 Pre Drilled and Tapped Shafting - 15.875x609.6 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Mon, Jun 30, 2025
$388.95 AUD
$466.75 AUD $388.95 AUD
Each
Diameter (D)
15.875
mm
- 0.010 / - 0.030
(0.625 in.)
Length (L)
609.6
mm

(24 in.)
Material
440C Case Hardened Stainless
Pre Drilled and Tapped Shafting - 15.875x609.6 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 101.6    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C    Ends: Finished and Chamfered   
Part Number: 0R-0159-0610-DT-S440-T30 Pre Drilled and Tapped Shafting - 15.875x609.6 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Mon, Jun 30, 2025
$388.95 AUD
$466.75 AUD $388.95 AUD
Each
View the product page first if you are unsure.
Diameter (D)
19.050
mm
- 0.010 / - 0.030
(0.75 in.)
Length (L)
152.4
mm

(6 in.)
Material
440C Case Hardened Stainless
Hole Pitch (P)
152.4
Surface Finish
0.30 um
Microns
Pre Drilled and Tapped Shafting - 19.05x152.4 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C    Ends: Finished and Chamfered   
Part Number: 0R-0191-1829-DT-S440-T30 Pre Drilled and Tapped Shafting - 19.05x152.4 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Mon, Jun 30, 2025
$2,024.41 AUD
$2,429.29 AUD $2,024.41 AUD
Each
Diameter (D)
19.050
mm
- 0.010 / - 0.030
(0.75 in.)
Length (L)
152.4
mm

(6 in.)
Material
440C Case Hardened Stainless
Pre Drilled and Tapped Shafting - 19.05x152.4 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C    Ends: Finished and Chamfered   
Part Number: 0R-0191-1829-DT-S440-T30 Pre Drilled and Tapped Shafting - 19.05x152.4 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Mon, Jun 30, 2025
$2,024.41 AUD
$2,429.29 AUD $2,024.41 AUD
Each
View the product page first if you are unsure.
Diameter (D)
19.050
mm
- 0.010 / - 0.030
(0.75 in.)
Length (L)
610
mm

(24.016 in.)
Material
440C Case Hardened Stainless
Hole Pitch (P)
152.4
Surface Finish
0.30 um
Microns
Pre Drilled and Tapped Shafting - 19.05x610 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C    Ends: Finished and Chamfered   
Part Number: 0R-0191-0610-DT-S440-T30 Pre Drilled and Tapped Shafting - 19.05x610 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Mon, Jun 30, 2025
$678.05 AUD
$813.65 AUD $678.05 AUD
Each
Diameter (D)
19.050
mm
- 0.010 / - 0.030
(0.75 in.)
Length (L)
610
mm

(24.016 in.)
Material
440C Case Hardened Stainless
Pre Drilled and Tapped Shafting - 19.05x610 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C    Ends: Finished and Chamfered   
Part Number: 0R-0191-0610-DT-S440-T30 Pre Drilled and Tapped Shafting - 19.05x610 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Mon, Jun 30, 2025
$678.05 AUD
$813.65 AUD $678.05 AUD
Each
View the product page first if you are unsure.
Diameter (D)
25.400
mm
- 0.010 / - 0.030
(1 in.)
Length (L)
152.4
mm

(6 in.)
Material
440C Case Hardened Stainless
Hole Pitch (P)
152.4
Surface Finish
0.30 um
Microns
Pre Drilled and Tapped Shafting - 25.4x152.4 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C    Ends: Finished and Chamfered   
Part Number: 0R-0254-1829-DT-S440-T30 Pre Drilled and Tapped Shafting - 25.4x152.4 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Mon, Jun 30, 2025
$2,528.05 AUD
$3,033.65 AUD $2,528.05 AUD
Each
Diameter (D)
25.400
mm
- 0.010 / - 0.030
(1 in.)
Length (L)
152.4
mm

(6 in.)
Material
440C Case Hardened Stainless
Pre Drilled and Tapped Shafting - 25.4x152.4 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C    Ends: Finished and Chamfered   
Part Number: 0R-0254-1829-DT-S440-T30 Pre Drilled and Tapped Shafting - 25.4x152.4 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Mon, Jun 30, 2025
$2,528.05 AUD
$3,033.65 AUD $2,528.05 AUD
Each
View the product page first if you are unsure.
Diameter (D)
25.400
mm
- 0.010 / - 0.030
(1 in.)
Length (L)
610
mm

(24.016 in.)
Material
440C Case Hardened Stainless
Hole Pitch (P)
152.4
Surface Finish
0.30 um
Microns
Pre Drilled and Tapped Shafting - 25.4x610 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C    Ends: Finished and Chamfered   
Part Number: 0R-0254-0610-DT-S440-T30 Pre Drilled and Tapped Shafting - 25.4x610 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Mon, Jun 30, 2025
$871.32 AUD
$1,045.58 AUD $871.32 AUD
Each
Diameter (D)
25.400
mm
- 0.010 / - 0.030
(1 in.)
Length (L)
610
mm

(24.016 in.)
Material
440C Case Hardened Stainless
Pre Drilled and Tapped Shafting - 25.4x610 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C    Ends: Finished and Chamfered   
Part Number: 0R-0254-0610-DT-S440-T30 Pre Drilled and Tapped Shafting - 25.4x610 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Mon, Jun 30, 2025
$871.32 AUD
$1,045.58 AUD $871.32 AUD
Each
View the product page first if you are unsure.
Diameter (D)
25.400
mm
- 0.010 / - 0.030
(1 in.)
Length (L)
1219.2
mm

(48 in.)
Material
440C Case Hardened Stainless
Hole Pitch (P)
152.4
Surface Finish
0.30 um
Microns
Pre Drilled and Tapped Shafting - 25.4x1219.2 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C    Ends: Finished and Chamfered   
Part Number: 0R-0254-1219-DT-S440-T30 Pre Drilled and Tapped Shafting - 25.4x1219.2 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Mon, Jun 30, 2025
$1,715.41 AUD
$2,058.49 AUD $1,715.41 AUD
Each
Diameter (D)
25.400
mm
- 0.010 / - 0.030
(1 in.)
Length (L)
1219.2
mm

(48 in.)
Material
440C Case Hardened Stainless
Pre Drilled and Tapped Shafting - 25.4x1219.2 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C    Ends: Finished and Chamfered   
Part Number: 0R-0254-1219-DT-S440-T30 Pre Drilled and Tapped Shafting - 25.4x1219.2 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Mon, Jun 30, 2025
$1,715.41 AUD
$2,058.49 AUD $1,715.41 AUD
Each
View the product page first if you are unsure.