Shafting - Pre Drilled and Tapped

8 Products in this selection
This is a combined category of Pre Drilled and Tapped Shafting.
Use the filters in the table below, or the category tree above to refine the selection. To order any item, simply click the part number for a full product page, then add to your cart.
Additional resources:
Drill Rod
A more concise listing may be found on the Smallparts store at Shafting - Pre Drilled and Tapped. Smallparts promote the most popular MBA products.
Diameter (D) Length (L) Material Thread Size Hole Pitch (P) Surface Finish Indicative
Image
Diameter (D)
12.700
mm
- 0.010 / - 0.030
(0.5 in.)
Length (L)
609.6
mm

(24 in.)
Material
440C Case Hardened Stainless
Hole Pitch (P)
101.6
Surface Finish
0.30 um
Microns
Pre Drilled and Tapped Shafting - 12.7x609.6 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0127-0610-DT-S440-T30 Pre Drilled and Tapped Shafting - 12.7x609.6 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Sun, Jun 29, 2025
$348.32 AUD
$417.98 AUD $348.32 AUD
Each
Diameter (D) Length (L) Material Thread Size Indicative
Image
Diameter (D)
12.700
mm
- 0.010 / - 0.030
(0.5 in.)
Length (L)
609.6
mm

(24 in.)
Material
440C Case Hardened Stainless
Pre Drilled and Tapped Shafting - 12.7x609.6 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 101.6    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0127-0610-DT-S440-T30 Pre Drilled and Tapped Shafting - 12.7x609.6 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Sun, Jun 29, 2025
$348.32 AUD
$417.98 AUD $348.32 AUD
Each
View the product page first if you are unsure.
Diameter (D)
15.875
mm
- 0.010 / - 0.030
(0.625 in.)
Length (L)
101.6
mm

(4 in.)
Material
440C Case Hardened Stainless
Hole Pitch (P)
101.6
Surface Finish
0.30 um
Microns
Pre Drilled and Tapped Shafting - 15.875x101.6 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0159-1829-DT-S440-T30 Pre Drilled and Tapped Shafting - 15.875x101.6 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Sun, Jun 29, 2025
$1,946.23 AUD
$2,335.47 AUD $1,946.23 AUD
Each
Diameter (D)
15.875
mm
- 0.010 / - 0.030
(0.625 in.)
Length (L)
101.6
mm

(4 in.)
Material
440C Case Hardened Stainless
Pre Drilled and Tapped Shafting - 15.875x101.6 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 101.6    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0159-1829-DT-S440-T30 Pre Drilled and Tapped Shafting - 15.875x101.6 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Sun, Jun 29, 2025
$1,946.23 AUD
$2,335.47 AUD $1,946.23 AUD
Each
View the product page first if you are unsure.
Diameter (D)
15.875
mm
- 0.010 / - 0.030
(0.625 in.)
Length (L)
609.6
mm

(24 in.)
Material
440C Case Hardened Stainless
Hole Pitch (P)
101.6
Surface Finish
0.30 um
Microns
Pre Drilled and Tapped Shafting - 15.875x609.6 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0159-0610-DT-S440-T30 Pre Drilled and Tapped Shafting - 15.875x609.6 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Sun, Jun 29, 2025
$388.95 AUD
$466.75 AUD $388.95 AUD
Each
Diameter (D)
15.875
mm
- 0.010 / - 0.030
(0.625 in.)
Length (L)
609.6
mm

(24 in.)
Material
440C Case Hardened Stainless
Pre Drilled and Tapped Shafting - 15.875x609.6 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 101.6    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0159-0610-DT-S440-T30 Pre Drilled and Tapped Shafting - 15.875x609.6 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Sun, Jun 29, 2025
$388.95 AUD
$466.75 AUD $388.95 AUD
Each
View the product page first if you are unsure.
Diameter (D)
19.050
mm
- 0.010 / - 0.030
(0.75 in.)
Length (L)
152.4
mm

(6 in.)
Material
440C Case Hardened Stainless
Hole Pitch (P)
152.4
Surface Finish
0.30 um
Microns
Pre Drilled and Tapped Shafting - 19.05x152.4 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0191-1829-DT-S440-T30 Pre Drilled and Tapped Shafting - 19.05x152.4 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Sun, Jun 29, 2025
$2,024.41 AUD
$2,429.29 AUD $2,024.41 AUD
Each
Diameter (D)
19.050
mm
- 0.010 / - 0.030
(0.75 in.)
Length (L)
152.4
mm

(6 in.)
Material
440C Case Hardened Stainless
Pre Drilled and Tapped Shafting - 19.05x152.4 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0191-1829-DT-S440-T30 Pre Drilled and Tapped Shafting - 19.05x152.4 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Sun, Jun 29, 2025
$2,024.41 AUD
$2,429.29 AUD $2,024.41 AUD
Each
View the product page first if you are unsure.
Diameter (D)
19.050
mm
- 0.010 / - 0.030
(0.75 in.)
Length (L)
610
mm

(24.016 in.)
Material
440C Case Hardened Stainless
Hole Pitch (P)
152.4
Surface Finish
0.30 um
Microns
Pre Drilled and Tapped Shafting - 19.05x610 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0191-0610-DT-S440-T30 Pre Drilled and Tapped Shafting - 19.05x610 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Sun, Jun 29, 2025
$678.05 AUD
$813.65 AUD $678.05 AUD
Each
Diameter (D)
19.050
mm
- 0.010 / - 0.030
(0.75 in.)
Length (L)
610
mm

(24.016 in.)
Material
440C Case Hardened Stainless
Pre Drilled and Tapped Shafting - 19.05x610 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0191-0610-DT-S440-T30 Pre Drilled and Tapped Shafting - 19.05x610 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Sun, Jun 29, 2025
$678.05 AUD
$813.65 AUD $678.05 AUD
Each
View the product page first if you are unsure.
Diameter (D)
25.400
mm
- 0.010 / - 0.030
(1 in.)
Length (L)
152.4
mm

(6 in.)
Material
440C Case Hardened Stainless
Hole Pitch (P)
152.4
Surface Finish
0.30 um
Microns
Pre Drilled and Tapped Shafting - 25.4x152.4 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0254-1829-DT-S440-T30 Pre Drilled and Tapped Shafting - 25.4x152.4 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Sun, Jun 29, 2025
$2,528.05 AUD
$3,033.65 AUD $2,528.05 AUD
Each
Diameter (D)
25.400
mm
- 0.010 / - 0.030
(1 in.)
Length (L)
152.4
mm

(6 in.)
Material
440C Case Hardened Stainless
Pre Drilled and Tapped Shafting - 25.4x152.4 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0254-1829-DT-S440-T30 Pre Drilled and Tapped Shafting - 25.4x152.4 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Sun, Jun 29, 2025
$2,528.05 AUD
$3,033.65 AUD $2,528.05 AUD
Each
View the product page first if you are unsure.
Diameter (D)
25.400
mm
- 0.010 / - 0.030
(1 in.)
Length (L)
610
mm

(24.016 in.)
Material
440C Case Hardened Stainless
Hole Pitch (P)
152.4
Surface Finish
0.30 um
Microns
Pre Drilled and Tapped Shafting - 25.4x610 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0254-0610-DT-S440-T30 Pre Drilled and Tapped Shafting - 25.4x610 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Sun, Jun 29, 2025
$871.32 AUD
$1,045.58 AUD $871.32 AUD
Each
Diameter (D)
25.400
mm
- 0.010 / - 0.030
(1 in.)
Length (L)
610
mm

(24.016 in.)
Material
440C Case Hardened Stainless
Pre Drilled and Tapped Shafting - 25.4x610 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0254-0610-DT-S440-T30 Pre Drilled and Tapped Shafting - 25.4x610 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Sun, Jun 29, 2025
$871.32 AUD
$1,045.58 AUD $871.32 AUD
Each
View the product page first if you are unsure.
Diameter (D)
25.400
mm
- 0.010 / - 0.030
(1 in.)
Length (L)
1219.2
mm

(48 in.)
Material
440C Case Hardened Stainless
Hole Pitch (P)
152.4
Surface Finish
0.30 um
Microns
Pre Drilled and Tapped Shafting - 25.4x1219.2 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0254-1219-DT-S440-T30 Pre Drilled and Tapped Shafting - 25.4x1219.2 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Sun, Jun 29, 2025
$1,715.41 AUD
$2,058.49 AUD $1,715.41 AUD
Each
Diameter (D)
25.400
mm
- 0.010 / - 0.030
(1 in.)
Length (L)
1219.2
mm

(48 in.)
Material
440C Case Hardened Stainless
Pre Drilled and Tapped Shafting - 25.4x1219.2 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0254-1219-DT-S440-T30 Pre Drilled and Tapped Shafting - 25.4x1219.2 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Sun, Jun 29, 2025
$1,715.41 AUD
$2,058.49 AUD $1,715.41 AUD
Each
View the product page first if you are unsure.