Pins - Hammer Drive - Flat Head

Pins -> Hammer Drive -> Flat Head

There are 23 products in the sub-categories of Pins - Hammer Drive - Flat Head. Scroll down or follow the link to Pins - Hammer Drive - Flat Head in the products table to see all these items combined into a handy table with filters.

Category Details

A selection of Flat Head Hammer Drive Pins. Used to replace screws where the need to remove the pin is unlikely.

  • Low Carbon Steel (Series HP210) - self-colour, not plated cold formed pin.
  • Simple, low cost assembly for use in mild steel, aluminium, brass or plastics.
  • Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly.
  • Drive studs do not require lock washers to prevent back-out.
  • Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Pins - Hammer Drive - Flat Head category on the Small Parts & Bearings online store.
Min Hole Dia (d1) Approx. Length (L) Max Hole Dia. Approx Pin Diameter (d2) Max Head Diameter (d3) Max Head Thickness (T) Indicative
Image
Min Hole Dia (d1)
1.40
mm

(Equiv. 0.055 in.)
Approx. Length (L)
5.0
mm

(Equiv. 0.197 in.)
Max Hole Dia.
1.46
mm

(Equiv. 0.057 in.)
Approx Pin Diameter (d2)
1.63
mm
Max Head Diameter (d3)
2.60
mm
Max Head Thickness (T)
0.55
mm
Hammer Drive Pins - 1.4x5x1.46 mm - Carbon Steel
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP014-05F (20 Pcs)
Hammer Drive Pins - 1.4x5x1.46 mm Flat Head - Carbon Steel Pin
50 units (1000 pcs) Available Now | Item Discontinued - Up to 50 may be ordered online. No backorders. Please contact us if you need a larger quantity
$6.34 AUD
$31.39 AUD $6.34 AUD
Excludes GST and overseas Taxes & Duties
Per 20
Quantity Required

50 units (1000 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Min Hole Dia (d1) Approx. Length (L) Max Hole Dia. Approx Pin Diameter (d2) Indicative
Image
Min Hole Dia (d1)
1.40
mm

(Equiv. 0.055 in.)
Approx. Length (L)
5.0
mm

(Equiv. 0.197 in.)
Max Hole Dia.
1.46
mm

(Equiv. 0.057 in.)
Approx Pin Diameter (d2)
1.63
mm
Hammer Drive Pins - 1.4x5x1.46 mm - Carbon Steel
Material: Carbon Steel    Max Head Diameter (d3): 2.60 mm    Max Head Thickness (T): 0.55 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP014-05F (20 Pcs)
Hammer Drive Pins - 1.4x5x1.46 mm Flat Head - Carbon Steel Pin
50 units (1000 pcs) Available Now | Item Discontinued - Up to 50 may be ordered online. No backorders. Please contact us if you need a larger quantity
$6.34 AUD
$31.39 AUD $6.34 AUD
Excludes GST and overseas Taxes & Duties
Per 20
Quantity Required

50 units (1000 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Min Hole Dia (d1)
1.40
mm

(Equiv. 0.055 in.)
Approx. Length (L)
6.0
mm

(Equiv. 0.236 in.)
Max Hole Dia.
1.46
mm

(Equiv. 0.057 in.)
Approx Pin Diameter (d2)
1.63
mm
Max Head Diameter (d3)
2.60
mm
Max Head Thickness (T)
0.55
mm
Hammer Drive Pins - 1.4x6x1.46 mm - Carbon Steel
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP014-06F (20 Pcs)
Hammer Drive Pins - 1.4x6x1.46 mm Flat Head - Carbon Steel Pin
50 units (1000 pcs) Available Now | Item Discontinued - Up to 50 may be ordered online. No backorders. Please contact us if you need a larger quantity
$6.34 AUD
$31.54 AUD $6.34 AUD
Excludes GST and overseas Taxes & Duties
Per 20
Quantity Required

50 units (1000 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Min Hole Dia (d1)
1.40
mm

(Equiv. 0.055 in.)
Approx. Length (L)
6.0
mm

(Equiv. 0.236 in.)
Max Hole Dia.
1.46
mm

(Equiv. 0.057 in.)
Approx Pin Diameter (d2)
1.63
mm
Hammer Drive Pins - 1.4x6x1.46 mm - Carbon Steel
Material: Carbon Steel    Max Head Diameter (d3): 2.60 mm    Max Head Thickness (T): 0.55 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP014-06F (20 Pcs)
Hammer Drive Pins - 1.4x6x1.46 mm Flat Head - Carbon Steel Pin
50 units (1000 pcs) Available Now | Item Discontinued - Up to 50 may be ordered online. No backorders. Please contact us if you need a larger quantity
$6.34 AUD
$31.54 AUD $6.34 AUD
Excludes GST and overseas Taxes & Duties
Per 20
Quantity Required

50 units (1000 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Min Hole Dia (d1)
1.40
mm

(Equiv. 0.055 in.)
Approx. Length (L)
8.0
mm

(Equiv. 0.315 in.)
Max Hole Dia.
1.46
mm

(Equiv. 0.057 in.)
Approx Pin Diameter (d2)
1.63
mm
Max Head Diameter (d3)
2.60
mm
Max Head Thickness (T)
0.55
mm
Hammer Drive Pins - 1.4x8x1.46 mm - Carbon Steel
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP014-08F (5 Pcs)
Hammer Drive Pins - 1.4x8x1.46 mm Flat Head - Carbon Steel Pin
234 units (1170 pcs) Available Now | Further orders can be expected around Wed, Nov 19, 2025
$3.32 AUD
$3.32 AUD
Excludes GST and overseas Taxes & Duties
Per 5
Quantity Required

234 units (1170 pcs) Available Now. Backorder if more than 234.
Min Hole Dia (d1)
1.40
mm

(Equiv. 0.055 in.)
Approx. Length (L)
8.0
mm

(Equiv. 0.315 in.)
Max Hole Dia.
1.46
mm

(Equiv. 0.057 in.)
Approx Pin Diameter (d2)
1.63
mm
Hammer Drive Pins - 1.4x8x1.46 mm - Carbon Steel
Material: Carbon Steel    Max Head Diameter (d3): 2.60 mm    Max Head Thickness (T): 0.55 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP014-08F (5 Pcs)
Hammer Drive Pins - 1.4x8x1.46 mm Flat Head - Carbon Steel Pin
234 units (1170 pcs) Available Now | Further orders can be expected around Wed, Nov 19, 2025
$3.32 AUD
$3.32 AUD
Excludes GST and overseas Taxes & Duties
Per 5
Quantity Required

234 units (1170 pcs) Available Now. Backorder if more than 234.
Min Hole Dia (d1)
1.60
mm

(Equiv. 0.063 in.)
Approx. Length (L)
5.0
mm

(Equiv. 0.197 in.)
Max Hole Dia.
1.66
mm

(Equiv. 0.065 in.)
Approx Pin Diameter (d2)
1.83
mm
Max Head Diameter (d3)
3.00
mm
Max Head Thickness (T)
0.65
mm
Hammer Drive Pins - 1.6x5x1.66 mm - Carbon Steel
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP016-05F (20 Pcs)
Hammer Drive Pins - 1.6x5x1.66 mm Flat Head - Carbon Steel Pin
40 units (800 pcs) Available Now | Item Discontinued - Up to 40 may be ordered online. No backorders. Please contact us if you need a larger quantity
$6.34 AUD
$31.39 AUD $6.34 AUD
Excludes GST and overseas Taxes & Duties
Per 20
Quantity Required

40 units (800 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Min Hole Dia (d1)
1.60
mm

(Equiv. 0.063 in.)
Approx. Length (L)
5.0
mm

(Equiv. 0.197 in.)
Max Hole Dia.
1.66
mm

(Equiv. 0.065 in.)
Approx Pin Diameter (d2)
1.83
mm
Hammer Drive Pins - 1.6x5x1.66 mm - Carbon Steel
Material: Carbon Steel    Max Head Diameter (d3): 3.00 mm    Max Head Thickness (T): 0.65 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP016-05F (20 Pcs)
Hammer Drive Pins - 1.6x5x1.66 mm Flat Head - Carbon Steel Pin
40 units (800 pcs) Available Now | Item Discontinued - Up to 40 may be ordered online. No backorders. Please contact us if you need a larger quantity
$6.34 AUD
$31.39 AUD $6.34 AUD
Excludes GST and overseas Taxes & Duties
Per 20
Quantity Required

40 units (800 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Min Hole Dia (d1)
1.60
mm

(Equiv. 0.063 in.)
Approx. Length (L)
6.0
mm

(Equiv. 0.236 in.)
Max Hole Dia.
1.66
mm

(Equiv. 0.065 in.)
Approx Pin Diameter (d2)
1.83
mm
Max Head Diameter (d3)
3.00
mm
Max Head Thickness (T)
0.65
mm
Hammer Drive Pins - 1.6x6x1.66 mm - Carbon Steel
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP016-06F (100 Pcs)
Hammer Drive Pins - 1.6x6x1.66 mm Flat Head - Carbon Steel Pin
40 units (4000 pcs) Available Now | Item Discontinued - Up to 40 may be ordered online. No backorders. Please contact us if you need a larger quantity
$18.00 AUD
$53.28 AUD $18.00 AUD
Excludes GST and overseas Taxes & Duties
Per 100
Quantity Required

40 units (4000 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Min Hole Dia (d1)
1.60
mm

(Equiv. 0.063 in.)
Approx. Length (L)
6.0
mm

(Equiv. 0.236 in.)
Max Hole Dia.
1.66
mm

(Equiv. 0.065 in.)
Approx Pin Diameter (d2)
1.83
mm
Hammer Drive Pins - 1.6x6x1.66 mm - Carbon Steel
Material: Carbon Steel    Max Head Diameter (d3): 3.00 mm    Max Head Thickness (T): 0.65 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP016-06F (100 Pcs)
Hammer Drive Pins - 1.6x6x1.66 mm Flat Head - Carbon Steel Pin
40 units (4000 pcs) Available Now | Item Discontinued - Up to 40 may be ordered online. No backorders. Please contact us if you need a larger quantity
$18.00 AUD
$53.28 AUD $18.00 AUD
Excludes GST and overseas Taxes & Duties
Per 100
Quantity Required

40 units (4000 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Min Hole Dia (d1)
1.60
mm

(Equiv. 0.063 in.)
Approx. Length (L)
8.0
mm

(Equiv. 0.315 in.)
Max Hole Dia.
1.66
mm

(Equiv. 0.065 in.)
Approx Pin Diameter (d2)
1.83
mm
Max Head Diameter (d3)
3.00
mm
Max Head Thickness (T)
0.65
mm
Hammer Drive Pins - 1.6x8x1.66 mm - Carbon Steel
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP016-08F (20 Pcs)
Hammer Drive Pins - 1.6x8x1.66 mm Flat Head - Carbon Steel Pin
54 units (1080 pcs) Available Now | Item Discontinued - Up to 54 may be ordered online. No backorders. Please contact us if you need a larger quantity
$6.34 AUD
$31.68 AUD $6.34 AUD
Excludes GST and overseas Taxes & Duties
Per 20
Quantity Required

54 units (1080 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Min Hole Dia (d1)
1.60
mm

(Equiv. 0.063 in.)
Approx. Length (L)
8.0
mm

(Equiv. 0.315 in.)
Max Hole Dia.
1.66
mm

(Equiv. 0.065 in.)
Approx Pin Diameter (d2)
1.83
mm
Hammer Drive Pins - 1.6x8x1.66 mm - Carbon Steel
Material: Carbon Steel    Max Head Diameter (d3): 3.00 mm    Max Head Thickness (T): 0.65 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP016-08F (20 Pcs)
Hammer Drive Pins - 1.6x8x1.66 mm Flat Head - Carbon Steel Pin
54 units (1080 pcs) Available Now | Item Discontinued - Up to 54 may be ordered online. No backorders. Please contact us if you need a larger quantity
$6.34 AUD
$31.68 AUD $6.34 AUD
Excludes GST and overseas Taxes & Duties
Per 20
Quantity Required

54 units (1080 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Min Hole Dia (d1)
2.00
mm

(Equiv. 0.079 in.)
Approx. Length (L)
6.0
mm

(Equiv. 0.236 in.)
Max Hole Dia.
2.06
mm

(Equiv. 0.081 in.)
Approx Pin Diameter (d2)
2.30
mm
Max Head Diameter (d3)
3.70
mm
Max Head Thickness (T)
0.75
mm
Hammer Drive Pins - 2x6x2.06 mm - Carbon Steel
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP020-06F (5 Pcs)
Hammer Drive Pins - 2x6x2.06 mm Flat Head - Carbon Steel Pin
2158 units (10790 pcs) Available Now | Further orders can be expected around Wed, Nov 19, 2025
$14.14 AUD
$14.14 AUD
Excludes GST and overseas Taxes & Duties
Per 5
Quantity Required

2158 units (10790 pcs) Available Now. Backorder if more than 2158.
Min Hole Dia (d1)
2.00
mm

(Equiv. 0.079 in.)
Approx. Length (L)
6.0
mm

(Equiv. 0.236 in.)
Max Hole Dia.
2.06
mm

(Equiv. 0.081 in.)
Approx Pin Diameter (d2)
2.30
mm
Hammer Drive Pins - 2x6x2.06 mm - Carbon Steel
Material: Carbon Steel    Max Head Diameter (d3): 3.70 mm    Max Head Thickness (T): 0.75 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP020-06F (5 Pcs)
Hammer Drive Pins - 2x6x2.06 mm Flat Head - Carbon Steel Pin
2158 units (10790 pcs) Available Now | Further orders can be expected around Wed, Nov 19, 2025
$14.14 AUD
$14.14 AUD
Excludes GST and overseas Taxes & Duties
Per 5
Quantity Required

2158 units (10790 pcs) Available Now. Backorder if more than 2158.
Min Hole Dia (d1)
2.00
mm

(Equiv. 0.079 in.)
Approx. Length (L)
8.0
mm

(Equiv. 0.315 in.)
Max Hole Dia.
2.06
mm

(Equiv. 0.081 in.)
Approx Pin Diameter (d2)
2.30
mm
Max Head Diameter (d3)
3.70
mm
Max Head Thickness (T)
0.75
mm
Hammer Drive Pins - 2x8x2.06 mm - Carbon Steel
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP020-08F (20 Pcs)
Hammer Drive Pins - 2x8x2.06 mm Flat Head - Carbon Steel Pin
38 units (760 pcs) Available Now | Item Discontinued - Up to 38 may be ordered online. No backorders. Please contact us if you need a larger quantity
$6.34 AUD
$31.97 AUD $6.34 AUD
Excludes GST and overseas Taxes & Duties
Per 20
Quantity Required

38 units (760 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Min Hole Dia (d1)
2.00
mm

(Equiv. 0.079 in.)
Approx. Length (L)
8.0
mm

(Equiv. 0.315 in.)
Max Hole Dia.
2.06
mm

(Equiv. 0.081 in.)
Approx Pin Diameter (d2)
2.30
mm
Hammer Drive Pins - 2x8x2.06 mm - Carbon Steel
Material: Carbon Steel    Max Head Diameter (d3): 3.70 mm    Max Head Thickness (T): 0.75 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP020-08F (20 Pcs)
Hammer Drive Pins - 2x8x2.06 mm Flat Head - Carbon Steel Pin
38 units (760 pcs) Available Now | Item Discontinued - Up to 38 may be ordered online. No backorders. Please contact us if you need a larger quantity
$6.34 AUD
$31.97 AUD $6.34 AUD
Excludes GST and overseas Taxes & Duties
Per 20
Quantity Required

38 units (760 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Min Hole Dia (d1)
2.00
mm

(Equiv. 0.079 in.)
Approx. Length (L)
10.0
mm

(Equiv. 0.394 in.)
Max Hole Dia.
2.06
mm

(Equiv. 0.081 in.)
Approx Pin Diameter (d2)
2.30
mm
Max Head Diameter (d3)
3.70
mm
Max Head Thickness (T)
0.75
mm
Hammer Drive Pins - 2x10x2.06 mm - Carbon Steel
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP020-10F (20 Pcs)
Hammer Drive Pins - 2x10x2.06 mm Flat Head - Carbon Steel Pin
49 units (980 pcs) Available Now | Item Discontinued - Up to 49 may be ordered online. No backorders. Please contact us if you need a larger quantity
$6.41 AUD
$32.11 AUD $6.41 AUD
Excludes GST and overseas Taxes & Duties
Per 20
Quantity Required

49 units (980 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Min Hole Dia (d1)
2.00
mm

(Equiv. 0.079 in.)
Approx. Length (L)
10.0
mm

(Equiv. 0.394 in.)
Max Hole Dia.
2.06
mm

(Equiv. 0.081 in.)
Approx Pin Diameter (d2)
2.30
mm
Hammer Drive Pins - 2x10x2.06 mm - Carbon Steel
Material: Carbon Steel    Max Head Diameter (d3): 3.70 mm    Max Head Thickness (T): 0.75 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP020-10F (20 Pcs)
Hammer Drive Pins - 2x10x2.06 mm Flat Head - Carbon Steel Pin
49 units (980 pcs) Available Now | Item Discontinued - Up to 49 may be ordered online. No backorders. Please contact us if you need a larger quantity
$6.41 AUD
$32.11 AUD $6.41 AUD
Excludes GST and overseas Taxes & Duties
Per 20
Quantity Required

49 units (980 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Min Hole Dia (d1)
2.50
mm

(Equiv. 0.098 in.)
Approx. Length (L)
6.0
mm

(Equiv. 0.236 in.)
Max Hole Dia.
2.56
mm

(Equiv. 0.101 in.)
Approx Pin Diameter (d2)
2.80
mm
Max Head Diameter (d3)
4.60
mm
Max Head Thickness (T)
0.90
mm
Hammer Drive Pins - 2.5x6x2.56 mm - Carbon Steel
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP025-06F (20 Pcs)
Hammer Drive Pins - 2.5x6x2.56 mm Flat Head - Carbon Steel Pin
425 units (8500 pcs) Available Now | Item Discontinued - Up to 425 may be ordered online. No backorders. Please contact us if you need a larger quantity
$7.09 AUD
$38.02 AUD $7.09 AUD
Excludes GST and overseas Taxes & Duties
Per 20
Quantity Required

425 units (8500 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Min Hole Dia (d1)
2.50
mm

(Equiv. 0.098 in.)
Approx. Length (L)
6.0
mm

(Equiv. 0.236 in.)
Max Hole Dia.
2.56
mm

(Equiv. 0.101 in.)
Approx Pin Diameter (d2)
2.80
mm
Hammer Drive Pins - 2.5x6x2.56 mm - Carbon Steel
Material: Carbon Steel    Max Head Diameter (d3): 4.60 mm    Max Head Thickness (T): 0.90 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP025-06F (20 Pcs)
Hammer Drive Pins - 2.5x6x2.56 mm Flat Head - Carbon Steel Pin
425 units (8500 pcs) Available Now | Item Discontinued - Up to 425 may be ordered online. No backorders. Please contact us if you need a larger quantity
$7.09 AUD
$38.02 AUD $7.09 AUD
Excludes GST and overseas Taxes & Duties
Per 20
Quantity Required

425 units (8500 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Min Hole Dia (d1)
2.50
mm

(Equiv. 0.098 in.)
Approx. Length (L)
8.0
mm

(Equiv. 0.315 in.)
Max Hole Dia.
2.56
mm

(Equiv. 0.101 in.)
Approx Pin Diameter (d2)
2.80
mm
Max Head Diameter (d3)
4.60
mm
Max Head Thickness (T)
0.90
mm
Hammer Drive Pins - 2.5x8x2.56 mm - Carbon Steel
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP025-08F (5 Pcs)
Hammer Drive Pins - 2.5x8x2.56 mm Flat Head - Carbon Steel Pin
1202 units (6010 pcs) Available Now | Further orders can be expected around Wed, Nov 19, 2025
$3.68 AUD
$3.68 AUD
Excludes GST and overseas Taxes & Duties
Per 5
Quantity Required

1202 units (6010 pcs) Available Now. Backorder if more than 1202.
Min Hole Dia (d1)
2.50
mm

(Equiv. 0.098 in.)
Approx. Length (L)
8.0
mm

(Equiv. 0.315 in.)
Max Hole Dia.
2.56
mm

(Equiv. 0.101 in.)
Approx Pin Diameter (d2)
2.80
mm
Hammer Drive Pins - 2.5x8x2.56 mm - Carbon Steel
Material: Carbon Steel    Max Head Diameter (d3): 4.60 mm    Max Head Thickness (T): 0.90 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP025-08F (5 Pcs)
Hammer Drive Pins - 2.5x8x2.56 mm Flat Head - Carbon Steel Pin
1202 units (6010 pcs) Available Now | Further orders can be expected around Wed, Nov 19, 2025
$3.68 AUD
$3.68 AUD
Excludes GST and overseas Taxes & Duties
Per 5
Quantity Required

1202 units (6010 pcs) Available Now. Backorder if more than 1202.
Min Hole Dia (d1)
2.50
mm

(Equiv. 0.098 in.)
Approx. Length (L)
10.0
mm

(Equiv. 0.394 in.)
Max Hole Dia.
2.56
mm

(Equiv. 0.101 in.)
Approx Pin Diameter (d2)
2.80
mm
Max Head Diameter (d3)
4.60
mm
Max Head Thickness (T)
0.90
mm
Hammer Drive Pins - 2.5x10x2.56 mm - Carbon Steel
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP025-10F (20 Pcs)
Hammer Drive Pins - 2.5x10x2.56 mm Flat Head - Carbon Steel Pin
50 units (1000 pcs) Available Now | Item Discontinued - Up to 50 may be ordered online. No backorders. Please contact us if you need a larger quantity
$6.49 AUD
$32.69 AUD $6.49 AUD
Excludes GST and overseas Taxes & Duties
Per 20
Quantity Required

50 units (1000 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Min Hole Dia (d1)
2.50
mm

(Equiv. 0.098 in.)
Approx. Length (L)
10.0
mm

(Equiv. 0.394 in.)
Max Hole Dia.
2.56
mm

(Equiv. 0.101 in.)
Approx Pin Diameter (d2)
2.80
mm
Hammer Drive Pins - 2.5x10x2.56 mm - Carbon Steel
Material: Carbon Steel    Max Head Diameter (d3): 4.60 mm    Max Head Thickness (T): 0.90 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP025-10F (20 Pcs)
Hammer Drive Pins - 2.5x10x2.56 mm Flat Head - Carbon Steel Pin
50 units (1000 pcs) Available Now | Item Discontinued - Up to 50 may be ordered online. No backorders. Please contact us if you need a larger quantity
$6.49 AUD
$32.69 AUD $6.49 AUD
Excludes GST and overseas Taxes & Duties
Per 20
Quantity Required

50 units (1000 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Min Hole Dia (d1)
3.00
mm

(Equiv. 0.118 in.)
Approx. Length (L)
8.0
mm

(Equiv. 0.315 in.)
Max Hole Dia.
3.06
mm

(Equiv. 0.12 in.)
Approx Pin Diameter (d2)
3.35
mm
Max Head Diameter (d3)
5.45
mm
Max Head Thickness (T)
1.20
mm
Hammer Drive Pins - 3x8x3.06 mm - Carbon Steel
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP030-08F (10 Pcs)
Hammer Drive Pins - 3x8x3.06 mm Flat Head - Carbon Steel Pin
106 units (1060 pcs) Available Now | Item Discontinued - Up to 106 may be ordered online. No backorders. Please contact us if you need a larger quantity
$3.86 AUD
$21.46 AUD $3.86 AUD
Excludes GST and overseas Taxes & Duties
Per 10
Quantity Required

106 units (1060 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Min Hole Dia (d1)
3.00
mm

(Equiv. 0.118 in.)
Approx. Length (L)
8.0
mm

(Equiv. 0.315 in.)
Max Hole Dia.
3.06
mm

(Equiv. 0.12 in.)
Approx Pin Diameter (d2)
3.35
mm
Hammer Drive Pins - 3x8x3.06 mm - Carbon Steel
Material: Carbon Steel    Max Head Diameter (d3): 5.45 mm    Max Head Thickness (T): 1.20 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP030-08F (10 Pcs)
Hammer Drive Pins - 3x8x3.06 mm Flat Head - Carbon Steel Pin
106 units (1060 pcs) Available Now | Item Discontinued - Up to 106 may be ordered online. No backorders. Please contact us if you need a larger quantity
$3.86 AUD
$21.46 AUD $3.86 AUD
Excludes GST and overseas Taxes & Duties
Per 10
Quantity Required

106 units (1060 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Min Hole Dia (d1)
3.00
mm

(Equiv. 0.118 in.)
Approx. Length (L)
10.0
mm

(Equiv. 0.394 in.)
Max Hole Dia.
3.06
mm

(Equiv. 0.12 in.)
Approx Pin Diameter (d2)
3.35
mm
Max Head Diameter (d3)
5.45
mm
Max Head Thickness (T)
1.20
mm
Hammer Drive Pins - 3x10x3.06 mm - Carbon Steel
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP030-10F (10 Pcs)
Hammer Drive Pins - 3x10x3.06 mm Flat Head - Carbon Steel Pin
252 units (2520 pcs) Available Now | Item Discontinued - Up to 252 may be ordered online. No backorders. Please contact us if you need a larger quantity
$3.79 AUD
$20.88 AUD $3.79 AUD
Excludes GST and overseas Taxes & Duties
Per 10
Quantity Required

252 units (2520 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Min Hole Dia (d1)
3.00
mm

(Equiv. 0.118 in.)
Approx. Length (L)
10.0
mm

(Equiv. 0.394 in.)
Max Hole Dia.
3.06
mm

(Equiv. 0.12 in.)
Approx Pin Diameter (d2)
3.35
mm
Hammer Drive Pins - 3x10x3.06 mm - Carbon Steel
Material: Carbon Steel    Max Head Diameter (d3): 5.45 mm    Max Head Thickness (T): 1.20 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP030-10F (10 Pcs)
Hammer Drive Pins - 3x10x3.06 mm Flat Head - Carbon Steel Pin
252 units (2520 pcs) Available Now | Item Discontinued - Up to 252 may be ordered online. No backorders. Please contact us if you need a larger quantity
$3.79 AUD
$20.88 AUD $3.79 AUD
Excludes GST and overseas Taxes & Duties
Per 10
Quantity Required

252 units (2520 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Min Hole Dia (d1)
3.00
mm

(Equiv. 0.118 in.)
Approx. Length (L)
12.0
mm

(Equiv. 0.472 in.)
Max Hole Dia.
3.06
mm

(Equiv. 0.12 in.)
Approx Pin Diameter (d2)
3.35
mm
Max Head Diameter (d3)
5.45
mm
Max Head Thickness (T)
1.20
mm
Hammer Drive Pins - 3x12x3.06 mm - Carbon Steel
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP030-12F (20 Pcs)
Hammer Drive Pins - 3x12x3.06 mm Flat Head - Carbon Steel Pin
45 units (900 pcs) Available Now | Item Discontinued - Up to 45 may be ordered online. No backorders. Please contact us if you need a larger quantity
$6.56 AUD
$33.55 AUD $6.56 AUD
Excludes GST and overseas Taxes & Duties
Per 20
Quantity Required

45 units (900 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Min Hole Dia (d1)
3.00
mm

(Equiv. 0.118 in.)
Approx. Length (L)
12.0
mm

(Equiv. 0.472 in.)
Max Hole Dia.
3.06
mm

(Equiv. 0.12 in.)
Approx Pin Diameter (d2)
3.35
mm
Hammer Drive Pins - 3x12x3.06 mm - Carbon Steel
Material: Carbon Steel    Max Head Diameter (d3): 5.45 mm    Max Head Thickness (T): 1.20 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP030-12F (20 Pcs)
Hammer Drive Pins - 3x12x3.06 mm Flat Head - Carbon Steel Pin
45 units (900 pcs) Available Now | Item Discontinued - Up to 45 may be ordered online. No backorders. Please contact us if you need a larger quantity
$6.56 AUD
$33.55 AUD $6.56 AUD
Excludes GST and overseas Taxes & Duties
Per 20
Quantity Required

45 units (900 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Min Hole Dia (d1)
4.00
mm

(Equiv. 0.157 in.)
Approx. Length (L)
10.0
mm

(Equiv. 0.394 in.)
Max Hole Dia.
4.08
mm

(Equiv. 0.161 in.)
Approx Pin Diameter (d2)
4.35
mm
Max Head Diameter (d3)
7.25
mm
Max Head Thickness (T)
1.50
mm
Hammer Drive Pins - 4x10x4.08 mm - Carbon Steel
Material: Carbon Steel    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP040-10F (10 Pcs)
Hammer Drive Pins - 4x10x4.08 mm Flat Head - Carbon Steel Pin
50 units (500 pcs) Available Now | Item Discontinued - Up to 50 may be ordered online. No backorders. Please contact us if you need a larger quantity
$3.71 AUD
$17.21 AUD $3.71 AUD
Excludes GST and overseas Taxes & Duties
Per 10
Quantity Required

50 units (500 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Min Hole Dia (d1)
4.00
mm

(Equiv. 0.157 in.)
Approx. Length (L)
10.0
mm

(Equiv. 0.394 in.)
Max Hole Dia.
4.08
mm

(Equiv. 0.161 in.)
Approx Pin Diameter (d2)
4.35
mm
Hammer Drive Pins - 4x10x4.08 mm - Carbon Steel
Material: Carbon Steel    Max Head Diameter (d3): 7.25 mm    Max Head Thickness (T): 1.50 mm    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP040-10F (10 Pcs)
Hammer Drive Pins - 4x10x4.08 mm Flat Head - Carbon Steel Pin
50 units (500 pcs) Available Now | Item Discontinued - Up to 50 may be ordered online. No backorders. Please contact us if you need a larger quantity
$3.71 AUD
$17.21 AUD $3.71 AUD
Excludes GST and overseas Taxes & Duties
Per 10
Quantity Required

50 units (500 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Min Hole Dia (d1)
4.00
mm

(Equiv. 0.157 in.)
Approx. Length (L)
12.0
mm

(Equiv. 0.472 in.)
Max Hole Dia.
4.08
mm

(Equiv. 0.161 in.)
Approx Pin Diameter (d2)
4.35
mm
Max Head Diameter (d3)
7.25
mm
Max Head Thickness (T)
1.50
mm
Hammer Drive Pins - 4x12x4.08 mm - Carbon Steel
Material: Carbon Steel    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP040-12F (10 Pcs)
Hammer Drive Pins - 4x12x4.08 mm Flat Head - Carbon Steel Pin
52 units (520 pcs) Available Now | Item Discontinued - Up to 52 may be ordered online. No backorders. Please contact us if you need a larger quantity
$3.79 AUD
$17.35 AUD $3.79 AUD
Excludes GST and overseas Taxes & Duties
Per 10
Quantity Required

52 units (520 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Min Hole Dia (d1)
4.00
mm

(Equiv. 0.157 in.)
Approx. Length (L)
12.0
mm

(Equiv. 0.472 in.)
Max Hole Dia.
4.08
mm

(Equiv. 0.161 in.)
Approx Pin Diameter (d2)
4.35
mm
Hammer Drive Pins - 4x12x4.08 mm - Carbon Steel
Material: Carbon Steel    Max Head Diameter (d3): 7.25 mm    Max Head Thickness (T): 1.50 mm    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP040-12F (10 Pcs)
Hammer Drive Pins - 4x12x4.08 mm Flat Head - Carbon Steel Pin
52 units (520 pcs) Available Now | Item Discontinued - Up to 52 may be ordered online. No backorders. Please contact us if you need a larger quantity
$3.79 AUD
$17.35 AUD $3.79 AUD
Excludes GST and overseas Taxes & Duties
Per 10
Quantity Required

52 units (520 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Min Hole Dia (d1)
4.00
mm

(Equiv. 0.157 in.)
Approx. Length (L)
16.0
mm

(Equiv. 0.63 in.)
Max Hole Dia.
4.08
mm

(Equiv. 0.161 in.)
Approx Pin Diameter (d2)
4.35
mm
Max Head Diameter (d3)
7.25
mm
Max Head Thickness (T)
1.50
mm
Hammer Drive Pins - 4x16x4.08 mm - Carbon Steel
Material: Carbon Steel    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP040-16F (5 Pcs)
Hammer Drive Pins - 4x16x4.08 mm Flat Head - Carbon Steel Pin
112 units (560 pcs) Available Now | Further orders can be expected around Wed, Nov 19, 2025
$3.77 AUD
$3.77 AUD
Excludes GST and overseas Taxes & Duties
Per 5
Quantity Required

112 units (560 pcs) Available Now. Backorder if more than 112.
Min Hole Dia (d1)
4.00
mm

(Equiv. 0.157 in.)
Approx. Length (L)
16.0
mm

(Equiv. 0.63 in.)
Max Hole Dia.
4.08
mm

(Equiv. 0.161 in.)
Approx Pin Diameter (d2)
4.35
mm
Hammer Drive Pins - 4x16x4.08 mm - Carbon Steel
Material: Carbon Steel    Max Head Diameter (d3): 7.25 mm    Max Head Thickness (T): 1.50 mm    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP040-16F (5 Pcs)
Hammer Drive Pins - 4x16x4.08 mm Flat Head - Carbon Steel Pin
112 units (560 pcs) Available Now | Further orders can be expected around Wed, Nov 19, 2025
$3.77 AUD
$3.77 AUD
Excludes GST and overseas Taxes & Duties
Per 5
Quantity Required

112 units (560 pcs) Available Now. Backorder if more than 112.
Min Hole Dia (d1)
5.00
mm

(Equiv. 0.197 in.)
Approx. Length (L)
12.0
mm

(Equiv. 0.472 in.)
Max Hole Dia.
5.08
mm

(Equiv. 0.2 in.)
Approx Pin Diameter (d2)
5.35
mm
Max Head Diameter (d3)
9.10
mm
Max Head Thickness (T)
1.80
mm
Hammer Drive Pins - 5x12x5.08 mm - Carbon Steel
Material: Carbon Steel    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP050-12F (5 Pcs)
Hammer Drive Pins - 5x12x5.08 mm Flat Head - Carbon Steel Pin
200 units (1000 pcs) Available Now | Further orders can be expected around Wed, Nov 19, 2025
$4.68 AUD
$4.68 AUD
Excludes GST and overseas Taxes & Duties
Per 5
Quantity Required

200 units (1000 pcs) Available Now. Backorder if more than 200.
Min Hole Dia (d1)
5.00
mm

(Equiv. 0.197 in.)
Approx. Length (L)
12.0
mm

(Equiv. 0.472 in.)
Max Hole Dia.
5.08
mm

(Equiv. 0.2 in.)
Approx Pin Diameter (d2)
5.35
mm
Hammer Drive Pins - 5x12x5.08 mm - Carbon Steel
Material: Carbon Steel    Max Head Diameter (d3): 9.10 mm    Max Head Thickness (T): 1.80 mm    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP050-12F (5 Pcs)
Hammer Drive Pins - 5x12x5.08 mm Flat Head - Carbon Steel Pin
200 units (1000 pcs) Available Now | Further orders can be expected around Wed, Nov 19, 2025
$4.68 AUD
$4.68 AUD
Excludes GST and overseas Taxes & Duties
Per 5
Quantity Required

200 units (1000 pcs) Available Now. Backorder if more than 200.
Min Hole Dia (d1)
5.00
mm

(Equiv. 0.197 in.)
Approx. Length (L)
16.0
mm

(Equiv. 0.63 in.)
Max Hole Dia.
5.08
mm

(Equiv. 0.2 in.)
Approx Pin Diameter (d2)
5.35
mm
Max Head Diameter (d3)
9.10
mm
Max Head Thickness (T)
1.80
mm
Hammer Drive Pins - 5x16x5.08 mm - Carbon Steel
Material: Carbon Steel    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP050-16F (10 Pcs)
Hammer Drive Pins - 5x16x5.08 mm Flat Head - Carbon Steel Pin
53 units (530 pcs) Available Now | Item Discontinued - Up to 53 may be ordered online. No backorders. Please contact us if you need a larger quantity
$3.94 AUD
$19.22 AUD $3.94 AUD
Excludes GST and overseas Taxes & Duties
Per 10
Quantity Required

53 units (530 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Min Hole Dia (d1)
5.00
mm

(Equiv. 0.197 in.)
Approx. Length (L)
16.0
mm

(Equiv. 0.63 in.)
Max Hole Dia.
5.08
mm

(Equiv. 0.2 in.)
Approx Pin Diameter (d2)
5.35
mm
Hammer Drive Pins - 5x16x5.08 mm - Carbon Steel
Material: Carbon Steel    Max Head Diameter (d3): 9.10 mm    Max Head Thickness (T): 1.80 mm    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP050-16F (10 Pcs)
Hammer Drive Pins - 5x16x5.08 mm Flat Head - Carbon Steel Pin
53 units (530 pcs) Available Now | Item Discontinued - Up to 53 may be ordered online. No backorders. Please contact us if you need a larger quantity
$3.94 AUD
$19.22 AUD $3.94 AUD
Excludes GST and overseas Taxes & Duties
Per 10
Quantity Required

53 units (530 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Min Hole Dia (d1)
5.00
mm

(Equiv. 0.197 in.)
Approx. Length (L)
20.0
mm

(Equiv. 0.787 in.)
Max Hole Dia.
5.08
mm

(Equiv. 0.2 in.)
Approx Pin Diameter (d2)
5.35
mm
Max Head Diameter (d3)
9.10
mm
Max Head Thickness (T)
1.80
mm
Hammer Drive Pins - 5x20x5.08 mm - Carbon Steel
Material: Carbon Steel    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP050-20F (10 Pcs)
Hammer Drive Pins - 5x20x5.08 mm Flat Head - Carbon Steel Pin
91 units (910 pcs) Available Now | Item Discontinued - Up to 91 may be ordered online. No backorders. Please contact us if you need a larger quantity
$3.86 AUD
$18.58 AUD $3.86 AUD
Excludes GST and overseas Taxes & Duties
Per 10
Quantity Required

91 units (910 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Min Hole Dia (d1)
5.00
mm

(Equiv. 0.197 in.)
Approx. Length (L)
20.0
mm

(Equiv. 0.787 in.)
Max Hole Dia.
5.08
mm

(Equiv. 0.2 in.)
Approx Pin Diameter (d2)
5.35
mm
Hammer Drive Pins - 5x20x5.08 mm - Carbon Steel
Material: Carbon Steel    Max Head Diameter (d3): 9.10 mm    Max Head Thickness (T): 1.80 mm    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP050-20F (10 Pcs)
Hammer Drive Pins - 5x20x5.08 mm Flat Head - Carbon Steel Pin
91 units (910 pcs) Available Now | Item Discontinued - Up to 91 may be ordered online. No backorders. Please contact us if you need a larger quantity
$3.86 AUD
$18.58 AUD $3.86 AUD
Excludes GST and overseas Taxes & Duties
Per 10
Quantity Required

91 units (910 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Min Hole Dia (d1)
6.00
mm

(Equiv. 0.236 in.)
Approx. Length (L)
16.0
mm

(Equiv. 0.63 in.)
Max Hole Dia.
6.08
mm

(Equiv. 0.239 in.)
Approx Pin Diameter (d2)
6.35
mm
Max Head Diameter (d3)
10.80
mm
Max Head Thickness (T)
2.20
mm
Hammer Drive Pins - 6x16x6.08 mm - Carbon Steel
Material: Carbon Steel    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP060-16F (5 Pcs)
Hammer Drive Pins - 6x16x6.08 mm Flat Head - Carbon Steel Pin
495 units (2475 pcs) Available Now | Further orders can be expected around Wed, Nov 19, 2025
$4.59 AUD
$4.59 AUD
Excludes GST and overseas Taxes & Duties
Per 5
Quantity Required

495 units (2475 pcs) Available Now. Backorder if more than 495.
Min Hole Dia (d1)
6.00
mm

(Equiv. 0.236 in.)
Approx. Length (L)
16.0
mm

(Equiv. 0.63 in.)
Max Hole Dia.
6.08
mm

(Equiv. 0.239 in.)
Approx Pin Diameter (d2)
6.35
mm
Hammer Drive Pins - 6x16x6.08 mm - Carbon Steel
Material: Carbon Steel    Max Head Diameter (d3): 10.80 mm    Max Head Thickness (T): 2.20 mm    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP060-16F (5 Pcs)
Hammer Drive Pins - 6x16x6.08 mm Flat Head - Carbon Steel Pin
495 units (2475 pcs) Available Now | Further orders can be expected around Wed, Nov 19, 2025
$4.59 AUD
$4.59 AUD
Excludes GST and overseas Taxes & Duties
Per 5
Quantity Required

495 units (2475 pcs) Available Now. Backorder if more than 495.
Min Hole Dia (d1)
6.00
mm

(Equiv. 0.236 in.)
Approx. Length (L)
20.0
mm

(Equiv. 0.787 in.)
Max Hole Dia.
6.08
mm

(Equiv. 0.239 in.)
Approx Pin Diameter (d2)
6.35
mm
Max Head Diameter (d3)
10.80
mm
Max Head Thickness (T)
2.20
mm
Hammer Drive Pins - 6x20x6.08 mm - Carbon Steel
Material: Carbon Steel    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP060-20F (10 Pcs)
Hammer Drive Pins - 6x20x6.08 mm Flat Head - Carbon Steel Pin
50 units (500 pcs) Available Now | Item Discontinued - Up to 50 may be ordered online. No backorders. Please contact us if you need a larger quantity
$4.39 AUD
$22.61 AUD $4.39 AUD
Excludes GST and overseas Taxes & Duties
Per 10
Quantity Required

50 units (500 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Min Hole Dia (d1)
6.00
mm

(Equiv. 0.236 in.)
Approx. Length (L)
20.0
mm

(Equiv. 0.787 in.)
Max Hole Dia.
6.08
mm

(Equiv. 0.239 in.)
Approx Pin Diameter (d2)
6.35
mm
Hammer Drive Pins - 6x20x6.08 mm - Carbon Steel
Material: Carbon Steel    Max Head Diameter (d3): 10.80 mm    Max Head Thickness (T): 2.20 mm    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP060-20F (10 Pcs)
Hammer Drive Pins - 6x20x6.08 mm Flat Head - Carbon Steel Pin
50 units (500 pcs) Available Now | Item Discontinued - Up to 50 may be ordered online. No backorders. Please contact us if you need a larger quantity
$4.39 AUD
$22.61 AUD $4.39 AUD
Excludes GST and overseas Taxes & Duties
Per 10
Quantity Required

50 units (500 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.